Drifter Adventure

Choose your own Adventure

Go anywhere, and bring anything.

Configure + Buy a Drifter Adventure

The No. 22 Drifter Adventure

Starting with our award-winning Drifter, the Drifter Adventure is for riders seeking more. Additional tire clearance and compatibility for 1X drivetrains only allows the Drifter Adventure to run larger tires to take your adventures further off the beaten path. A bevy of standard mounts—seat tube, top of down tube, underside of down tube, bento, rack, fender and dynamo—let you bring more with you. Subtly revised handling allows the Drifter Adventure to make the most of its capability with good on-road manners, and poise when trails get rough.

"What I like the most about what No. 22 did with the Drifter Adventure is how even-keeled it rides."

"It can go when you want it to, but on those days where your legs are already sore, it's comfortable and cushy to embrace a long, slog of a climb. What I enjoyed the most were those long, rutted, loose descents, comfortably positioned in the drops without even holding the brake levers. When you know the terrain and its lines, the Drifter Adventure lets you disappear into the rhythm of the road. "

- The Radavist

Optional Finishes

Make your No. 22 truly yours. In addition to our standard raw finish, every No. 22 is available in a range of finish options including anodized, high polished, and Cerakote/anodized combinations.

Feature Rich

The Drifter Adventure includes as standard what most builders charge extra for. Every Drifter Adventure includes:

- Fully butted tubeset, butted in-house by CNC

- Oversized head tube with integrated bearings for tapered carbon forks

- Brushed and blasted frame graphics, with no decals or stickers

- Ten year warranty against manufacturing defects

- T47 threaded oversized bottom bracket shell

- Full carbon No. 22 fork designed specifically for our frames

- Generous clearance for 700x50mm tires

- 1X only drivetrain compatibility

- Thru axles front and rear

Available Full Cable Integration

The Drifter Adventure is available with our optional 3D printed titanium stem allowing for fully internal cables with electronic drivetrains. This option includes the bespoke stem, specifically designed head tube and our own Ti headset enabling cables to travel internally through the handlebar, stem, fork, headset and frame.


Brake Type Flat mount disc brakes
Tire Clearance 50mm/700C measured tire
Front Axle Spacing 100x12mm thru-axle
Rear Axle Spacing 142x12mm thru-axle
Fork Dimensions 50mm offset, 398mm length
Derailleur Hanger Replaceable aluminum hanger
Bottom Bracket Shell T47 threaded, 86mm wide
Front Derailleur Clamp Size Not recommended - 1X only
Seatpost Size 27.2mm
Headset Type 41/52mm integrated (standard cable routing)/ 52/52mm integrated (fully internal cable routing)
Mounts Included Bottle bosses on seat tube, top of down tube, bottom of down tube, top of top tube ("bento"); rack and fender; dynamo; fork leg bosses


Size 48cm 50cm 52cm 54cm 56cm 58cm 60cm
Effective top tube length (mm) 512 520 535 555 570 585 605
Seat tube, center-center (mm) 430 455 470 500 515 535 555
Head tube length (mm) 110 120 135 155 170 190 210
Seat tube angle (deg) 75 74.5 74.5 74 73.5 73.5 73
Head tube angle (deg) 70 70 70.5 70.7 70.7 71 71
Front center (mm) 591 594 606 620 631 643 660
Chain stay length (mm) 440 440 440 440 440 440 442
BB drop (mm) 80 80 80 80 80 80 75
Reach (mm) 364 364 375 384 390 399 409
Stack (mm) 542 552 568 588 602 622 636
Standover (700x50mm tires) 760 776 792 815 829 849 869

Available Finishes

All No. 22 frames are finished completely in-house, and are available in a broad range of finish options from classic Raw, to colorful Anodized, to stunning Cerakote and Anodized combinations.

Raw Finish

Every No. 22 frame comes with our Raw finish as standard. We never use stickers or decals for our graphics: the raw finish uses a mix of polished and blasted graphics to show off titanium's natural lustre in a timeless, durable way. Frames with Raw graphics include all of the same graphic details as our anodized finishes, but without the color.

Single-Color Anodized Finishes - $550

Fade Anodized Finishes - $900

High Polish Finish - $950

Cerakote and Anodized Finishes - $1,500

Discipline Chart

Our models span many types of riding and often have talents bridging from one area to another. Our Discipline Chart helps explain which models are best for your particular riding.

Accolades & Awards


The Build Process


Wishlist Products

You have no items in wishlist.